It's not a real loud ticking/clicking, but has a very rhythmic pattern to the ticking/clicking. November 28, 2011, 11:49:17 pm ».
On most dryers, the door switch makes an audible clicking sound when it activates.
Dryer not starting clicking sound. I am not sure what the clicking noise will be but you need to check the usual suspects. If so, you’ll need to replace it. Alternatively, there could also be.
To access the start relay in the console, remove the screws on the back of the end caps of the console and you can then lift it off of the top panel (with the dryer still unplugged). Hello.it is my pleasure to be working with you today.sorry you are having this problem.what area of the dryer is the clicking coming from.you can remove the front bottom panel by removing the 4 screws along the very bottom of the panel.remove the panel.being careful not to touch any of the wiring.press the start button.this should give you a idea of where the clicking is coming. Actually, i'm not sure if the ticking/clicking is coming from the drum, or the motor or some other component.
If you find a loose corner, this may well be the cause. The clicking noise means it’s activating. In most dryers, the dryer’s motor can still work, but the drum will not spin.
If the door switch is clicking when you press it, then it’s probably functioning. If your dryer is making a clicking sound it most likely has a bad fuse. The motor is not likely starting because the thermal fuse is likely faulty which breaks the voltage supply to the motor.
Dryer is not starting due to blown thermal fuse and clogged lint screen. To determine if the door switch is working, try starting your dryer and then listen for the “click.” if the door switch makes a clicking sound, it is probably not defective. Metal on metal can cause the dryer to overheat and even produce a spark,” lavalle says.
You’ll need to access the pulley to see if it’s worn, cracked, or broken. A failed idler pulley multiswitch may also cause it. Then once it does start it will hear for probably 15 minutes then it quits heating.
The part location is k560 on the blower housing. The idler pulley on a dryer helps secure the belt so the drum can rotate properly. If you don’t hear a click, use a multimeter to use the door switch for continuity.
Gas dryer will take about a couple of minutes to hear a click sound and to start heating. If there’s no click, you’ll need to replace the door switch. If the thermal fuse is okay, you could have a bad start relay even though it is clicking.
You could unplug the dryer and bypass the start relay in a similar manner to the thermal fuse to check this component. On most dryers, the door switch makes an audible clicking sound when it activates. Secure the screw and, if necessary, at a vibration pad to reduce the risk of the screw shaking loose again.
Determine if your samsung dryer has a belt switch. 31 answers from these members: If your dryer will not start and instead makes a clicking noise, it is most likely due to a fault with the door switch, start switch, or thermal fuse.
If your samsung dryer is not spinning and you hear the machine make clicking noises or just clicks, it could be many components, but one of the most common issues can be due to a faulty drum belt. When the door switch fails, the dryer won't start because the signal that the door is really closed isn’t being sent. The thermo fuse is located on the air duct at the front of the dryer.
You will have to take apart the dryer and drum assembly to get to it. The part number is 6931el3002a. If your dryer is clicking but not starting, this may be caused by a blown thermal fuse.
You have to remove the front bottom panel and look around behind the front air duct to see the white thermo fuse. The thermal fuse is located on the blower housing next to the thermistor. My 11 year old frigidaire dryer just started making a ticking/clicking noise the other day as the drum turns.
When the idler pulley breaks it may cause several symptoms, but one common is that the unit will click but not start. If the door switch is clicking when you press it, then it is working properly. To determine if the door switch is working, try starting your dryer and then listen for the “click.” if the door switch makes a clicking sound, it is probably not defective.
If there is no click, the door switch should be replaced. Dryer works just fine otherwise. Drive motor the drive motor is what makes the dryer’s drum turn and the blower wheel to work.
If you don’t hear a click, use a multimeter to use the door switch for continuity.