To release the pressure, head up to your roof and clear your vent of any obstructions by using a retrieval tool, garden hose, or drain snake. When you snake your sewer line, you will need to use a sewer snake, which is also known as a sewer auger.
If you suspect the clog is not in your home’s system but in the city’s, call the city.
How to clear a clog in your main sewer line. If you think your main sewer line is clogged, you can go outside and remove the cap on the main line drain pipe to release the pressure in the system. If it’s still intact after an hour, think what it’s doing in your pipes! If you don’t know how to unclog main sewer line, take advantage of vinegar to eliminate the grime, grease, and hair in the pipe.
To make sure your toilet paper will dissolve in the pipes, leave a square of it in the toilet bowl for an hour. Normally they are removed by using a snake or hydro jetting them. If you think your main sewer line is clogged, you can go outside and remove the cap on the main line drain pipe to release the pressure in the system.
What if the city sewer line is clogged? A clog from cracked or misaligned pipe. The main sewer line is the main drain pipe leading from the exterior of the residence or business to the city’s public sewer pipe connection or septic tank.
How the pros clean a main sewer line clog Mix 1/3 of a cup of vinegar with 1/3 of a cup of baking soda and pour the fizzy mixture into the clogged sewer drain immediately. Once the snake has captured the clog, you will pull it out and close your cleanout.
Barring a broken main sewer line, most clogs will be easily resolved using a hydro jet cleaner operated by an experienced technician. If you suspect a partial clog, the most effective solution is to snake your main sewer line. Private property owners are responsible for the service line (main line) from the tap on the sewer main to the home or business.
A professional plumber’s auger can reach down into the home’s sewer lines at length, whereas it’s hard to find one that has such a length at your local hardware store. Be careful and stand to one side while you’re pulling it off — any waste material that has backed up. When using a sewer rod, direct the rod through the pipe.
The small pipe cap is around 10 to 12 inches and often works to reduce the extent of spillage when the valves are opened. But again, it depends on your system and the problem. The next step, when dealing with clogs along the main sewer line, should be to loosen up the drainpipe caps.
If you think you have a main sewer line clog, acting quickly is key. How the pros clean a main sewer line clog you should repeat the process until the clog breaks free. Not all toilet tissue is created equal.
Plumber in long beach ca. Flush the pipe with hot water after one hour. Sometimes, if an obstruction is blocking your vent pipe, pressure will prevent your drains from draining down your main sewer line.
Once the drain cap is loose enough, allow it to stay for a few seconds. The cost of unclogging the main sewer line is usually $100 to $600, depending on the cause of the clog and the method used to remove the clog. Some of the methods we may use to clear a main sewer line clog include:
To see if a blockage is in house trap, it is. You should repeat the process until the clog breaks free. Once the drain cap is loose enough, allow it.
Turn the handle clockwise to dig the tip into the clog. You will insert the snake into your cleanout and feed it down the sewer line until it reaches the clog. Keeping the sewer line clear by flushing a chemical drain cleaning solution and hot water on occasion may also become part of your drain maintenance plan.
Main sewer line clog cost. In some houses, as stated previously, a clog in the main sewer line can start with house a trap blockage. Twist, push and pull the cable to break it up and unclog the drain.